3
We reserve the right to any technical change.
Valid on 2021.11.29
6. Programming of the first transmitter.
* - In case of lack of ‚’P2’’ button its function is performed by a combination of “STOP” and “UP” buttons.
7. Adding another transmitter
* - In case of lack of ‚’P2’’ button its function is performed by a combination of “STOP” and “UP” buttons.
8. Deleting the transmitter.
* - In case of lack of ‚’P2’’ button its function is performed by a combination of “STOP” and “UP” buttons.
9. Erasing all of the transmitters..
With the power on, press the PROG button which
will be confirmed by lighting of the LED.
Press the “P2” * button
within 10 seconds.
Correct programming of the
transmitter will be confirmed by a
flash of the LED and
short UP - DOWN move.
Press the „P2”* button
twice on a pre
programmed
transmitter.
Press the „P2” button * three
times on the
new
transmitter
Correct programming of the
transmitter will be confirmed by
a flash of the LED and
short UP - DOWN move.
Press the „P2” button*.
Press „STOP” button
Press the „P2” button*.
Acceptance of the settings will
be confirmed by a flash of the LED
and short UP - DOWN
move.
Press the PROG button five times.
Each press must be confirmed by flash of the LED.
Acceptance of the settings will
be confirmed by a longer flash
of the LED.
