Alu_Rehab Netti III, Руководство пользователя

Страница: 7 / 36

7
language: English model: Netti III Version: February 2007 language: English model: Netti III Version: February 2007 language: English model: Netti III Version: February 2007 language: English model: Netti III Version: February 2007
2.0 QUICK REFERENCE
The content of this page is a summary
of the whole manual. It gives you a brief
introduction to the use and care of the
Netti III wheelchair.
The quick reference is not a replacement
for the manual, only a reminder/check
list.
• Unpack the wheelchair (Chapter 6.1)
• Mount the main wheels (Chapter 6.2)
• Mount the front castors (Chapter 6.4)
• Put the back rest back, and mount the
recline gas strut to the back rest using the
locking bolt. (Chapter 6.7)
• Mount the arm supports (Chapter 6.11)
• Mount the cushions (Chapter 6.12)
• Mount the foot supports (Chapter 6.14)
• Adjust the push handles (Chapter 6.16)
• Mount the head support (Chapter 6.15)
• Mount accessory. (See chapter 5. for more
information. Mounting descriptions will
accompany the accessory.)
For troubleshooting, see chapter 10.
For adjustments see chapters 6.
Never stand on the foot plates due to
risk of tipping forward.
The foot and arm supports are not fixed
to the chair. Therefore never lift the
chair using these.
Check that the locking levers and safety
screws for the push handles are
mounted and securely fixed.
always check that the main wheels are
securely fixed. The release knob in the
hub should be pointing out, and the
shaft should be fixed inside the hub
bushing.
When tilt and recline is in the rearmost
position, make sure that the anti tip is
active.
For the safety of the user the anti tip
should always be active.
If in doubt - contact your dealer.
Specifications may vary between
countries.