manualshive.com logo in svg

Alu_Rehab Netti III, Руководство пользователя

Поделиться
Скачать
Alu_Rehab Netti III Скачать руководство пользователя страница 23

23

 

language: 

English  

model: 

Netti III  

Version: 

February 2007

   

language: 

English  

model: 

Netti III  

Version: 

February 2007

language: 

English  

model: 

Netti III  

Version: 

February 2007

   

language: 

English  

model: 

Netti III  

Version: 

February 2007

6.16 Push handles

adjustment of push handles:

• Release the lever on the side and lift

   the handle all the way up.

• Turn the handles into required position.
• Adjust height.
• Lock the handle in required position by    

   tightening the lever. 

Be sure to lock the handle properly.
Check that the safety screw is 

       properly tightened.

To remove the handles, the safety  

       screw at the bottom also has to be  
       removed.

6.17 adjusting the brakes

• The brakes are freely adjustable along the 

   frame tube.

• To activate the brake, push the handle                

   forward (Ill. 6.17.1)

                                      Ill. 6.17.1

• To release the brake, pull the handle                 

   rearwards (Ill. 6.17.2)

                                          Ill. 6.17.2.

• To reposition the brake, loosen the two 

   screws on the inside of the brake clamp

• For fine adjustment, loosen the upper 

   screw on the inside of the brakes

• Adjust the brake position and tighten the

   screws.  

 

5 mm allen key

Содержание Netti III





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды