Alu Rehab Netti I Comfort, Руководство пользователя

Страница: 23 / 38

23
Netti Rullestoler
language: English model: Netti I Comfort Version: November 2010
• Place the squared nut in the trace of the
head support bracket as shown above.
• Place the head support in the head
support bracket.
• The height and the depth of the head
support is set to the required positions
and tightened
• The head support bracket is fixed by
tightening the four screws two by two
diagonally so the bracket is fixed with
the same strength divided on the four
screws.
adjusting the head support in depth
:
• Release the locking lever on top of the
vertical bar (A).
• Adjust the head support and fix it in
required position.
adjusting the head support in height:
• Release the locking lever on the head
support adapter (C).
• Adjust the head support and fix it in
required position.
adjusting the head support in angle:
• Release the adjustment wheel at the rear
of the horizontal bar (B).
• Adjust the head support and fix it in
required position.
adjusting the head support sideways:
• The head support adapter can be moved
both to the right and left, giving the
possibility to accomodate special needs
for head support.
• Untighten the four screws holding the
adapter together.
• Move the adapter to the required
position and fix the adapter by
tightening the screws diagonally.
Remember to release the levers when
adjusting the head support.
If the head support stand does not fit
the bracket perfectly the bracket is
probably fixed too tight or unevenly.
after fitting the head support fix it
properly by tightening the little set
screw in the centre on top of the
head support bracket using an
allen-
key.
If the head support seems to short in
height, it can be turned 180° by
releasing the adjustment wheel at
the rear of the horizontal bar (B) .