21
Language:
English
Model:
Netti I allround
Version:
November 2010
Language:
English
Model:
Netti I allround
Version:
November 2010
Netti Rullestoler
Language:
English
Model:
Netti I allround
Version:
November 2010
Language:
English
Model:
Netti I allround
Version:
November 2010
Correctly adjusted anti tips should be
positioned just on the inside of the radius
of main wheel. Anti tips are adjusted as
follows:
• Unfix the locking clamp on the anti tip bar
using an Allen key.
• Pull or push the bar to required position
• Fix the locking clamp.
• Do the same procedure on the opposite
side.
6 mm Allen key
Check that both anti tips have the
same length. The gap between the
anti tip wheels and the ground must
be max 3 cm
If the anti tip is positioned on the
outside of the main wheel radius, it
will interfere with curbs and stairs
The anti tip should always be used for
the safety of the user.
6.11 Adjusting arm supports
• Turn the release handle to the side and
hold.
• Adjust the armrest to the required height
and release the handle. Lift or lower the
armrest slightly until it locks.
The armpad and locking screw are
set in the middle position. This can
be adjusted to suit the user.
.
6.12 Back rest cushion
The back rest cushions are fixed and adjusted
on the wheelchair using the velcro
It is imperative to correctly set-up the
cushion in order to ensure good
seating comfort
The cushion covers are washable and
thereby reuseable. Follow the
instruction on the back of the cushion
for correct maintenance and washing
of the cushion.
