Alu Rehab Netti 4U comfort|CE Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 34

Alu Rehab Netti 4U comfort|CE Скачать руководство пользователя страница 21

21

Language:

English

Model

:

Netti 4U comfort|CE

Version:

November 2010

netti rullestoler

Language:

English

Model:

Netti 4U comfort|CE

Version:

November 2010

Language:

English

Model

:

Netti 4U comfort|CE

Version:

November 2010

Language:

English

Model:

Netti 4U comfort|CE

Version:

November 2010

• To reposition the brake, loosen the two

screws on the inside of the brake clamp
(Ill. 6.12.3).

• Adjust the brake position and tighten the

screws.

Ill. 6.12.3

• For fine adjustment, loosen the upper

screw on the inside of the brakes
(Ill. 6.12.4)

• Adjust the brake position and tighten the

screw.

Ill. 6.12.4

5 mm Allen key

Check that the brakes are correctly

adjusted by activating the brakes
and be sure that the wheelchair
doesn’t move.

The brakes are constructred as

parking brakes and shall not be
used as driving brakes.

Be aware of potential squeeze

hazard between brake and tyre.

Drum brake

If the wheelchair is mounted with 12” or
16” main wheels, these will be equipped with
drum brakes.

If the brake doesn’t brake properly:

To adjust the wire on one or both sides,
adjust the foot screw 2-4 rounds out. Then
recheck the brakes.

If the wire is too loose:

adjust the foot screw all the way in. Tighten the
wire by loosening the wire clamp before pulling
the wire further through it. Tighten the wire
clamp, and adjust the foot screw out again.

1 pc 10 mm open-end spanner.

To ensure the correct functions of

the wire, these must never be

taut.

«
...
19
20
21
22
23
...
»

Содержание Netti 4U comfort|CE



































Отзывы:

Нет отзывов