Alu Rehab Netti 4U comfort|CE Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 34

background image

12

Language:

English

Model

:

Netti 4U comfort|CE

Version:

November 2010

Language:

English

Model:

Netti 4U comfort|CE

Version:

November 2010

Language:

English

Model

:

Netti 4U comfort|CE

Version:

November 2010

netti rullestoler

Language:

English

Model:

Netti 4U comfort|CE

Version:

November 2010

6. ASSEMBLING AND
ADJUSTMENT

6.1 Unpacking

1. unpack all the parts, and check that
everything is there according to the

packing list.
2. mount the main wheels (Chapter 6.2)
3. mount the front castors (Chapter 6.3)
4. Check and adjust the seat dept (Chap. 6.6)
5. mount the back rest (Chapter 6.5)
6. mount the seat cushion (Chapter 6.8)

7. mount the foot supports (Chapter 6.9)
8. mount the head support (Chapter 6.10)
9. mount any accessories (Chapter 5).

Weight of components (45 cm width chair):

main wheels: 1,9 kg each
anti tip: 0,1 kg each
Front castors: 0,8 kg each
Foot support angle adj.: 2 kg each
seat cushion: app. 1 kg
Head support a: 1 kg
Head support C: 0,9 kg

6.2 Main wheel

To mount the main wheel remove the
quick release bolt from the hub bushing,
lead it through the centre of the main wheel
and into the hub bushing while pressing the
knob in center.

To check that the main wheel is

properly attached to the hub, remove
the finger from the central knob and
pull at the main wheel.

If the main wheel doesn’t lock, don’t

use the wheelchair but contact
your dealer.

Sand and sea water (salt used for

gritting in the winter) can damage
the bearings of the main wheels and
front castors. Clean the wheelchair
thoroughly after exposure

6.3 Front castors

To take off

• Press the release button under the front

fork.

To mount

• Lead the quick release axle into the

bearing house. Pull the fork slightly to
ensure that the fork is fully locked.

6.4. Seat height adjustment

The seat height at the rear depends on:

• Size of main wheel.
• Position of main wheel.

• Using 24” main wheels in the upper hole,

the seat height is 46.5 cm from the floor
to the seating plate. using 24” main
wheels in the next upper position, the
height will measure 50 cm to the seating
plate.

«
...
10
11
12
13
14
...
»

Содержание Netti 4U comfort|CE



































Отзывы:

Нет отзывов

Похожие инструкции для Netti 4U comfort|CE

Бренд: Gate Страницы: 20

Бренд: Invacare Страницы: 20

LOOK Transfer Bench 1475

Бренд: PARSONS ADL Страницы: 2

Action 4 NG Heavy Duty

Бренд: Invacare Страницы: 76

Бренд: Meyra Страницы: 44

FORTE PLUS VCWK42L

Бренд: Vitea Care Страницы: 20

Бренд: Jazzy Страницы: 64

Бренд: Z-Tec Страницы: 4

ErGo Selpro 1000

Бренд: RehabCare Страницы: 16

Бренд: Dietz Страницы: 44

Бренд: R82 Страницы: 4

SWING AWAY AMPUTEE

Бренд: Permobil Страницы: 8

Бренд: Levo Страницы: 63

OBUSFORME CustomAIR OFCA-BLK

Бренд: HoMedics Страницы: 24

Бренд: Netti Страницы: 36

Бренд: Ferno Страницы: 21

Бренд: Ferno Страницы: 26

Бренд: Ferno Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды