Chapter 7. Real COM Port Management
79
3. Click
OK
to complete the operation.
Note:
1. If a range of ports was selected, and
Map consecutively
is enabled, the
COM ports are mapped to the Target ports in sequence based on the
port numbers.
2. Only
Virtual Mode
ports are mapped. Other ports in the range are
passed over.
Port Unmapping
To unmap virtual COM ports:
1. Either click
Unmap…
on the button bar or select
Unmap…
from the menu
to bring up the
Port Unmapping
dialog box:
2. Drop down the list of mapped COM ports and select the COM port you
wish to unmap.
3. Click
OK
to complete the operation.
Note:
For a consecutive unmapping, the COM ports are unmapped in
sequence based on the mapped COM port number.
sn816.book Page 79 Thursday, January 8, 2009 4:56 PM
