Altusen KM0216 / KM0432, Руководство пользователя

Страница: 63 / 92

Chapter 4. Hotkey Operation
49
Auto Scanning
Auto Scan switches among all the KVM ports that are accessible to the current
Operator at regular intervals (see
SCAN/SKIP MODE , page 37, for information
regarding accessible ports). This function is convenient for automatically
monitoring the activity of the computers on the installation.
Setting the Scan Interval:
The amount of time Auto Scan dwells on each port is set with the Scan
Duration setting of the OSD F3 SET function (see SCAN DURATION ,
page 37). You can change the scan interval before activating Hotkey Auto
Scanning, if you wish, with the following Hotkey combination:
1. Invoke HKM (see page 47).
2. Key in [T] [n]
Where [T] is the letter T , and [n] is a number from 1–255 that represents
the number of seconds for the dwell time.
The letter T and the numbers display on the Command Line as you key
them in. If you make a mistake, use [Backspace] to erase the wrong
number.
3. Press [Enter]
After you press [Enter], you automatically exit HKM, and are ready to
invoke Auto Scanning.