Altusen KM0216 / KM0432, Руководство пользователя

Страница: 21 / 92

Chapter 1. Introduction
7
1. Power LED
Lights to indicate that the KM0216 / KM0432 is powered on.
2. KVM Port LEDs (CPU Port LEDs)
The Port LEDs are multicolored (red/green/amber), and provide status
information about their corresponding KVM ports as follows:
3. Station ID LED
The KM0432's Station ID is displayed here. If this is a single station
installation (see page 17), or the first station of a daisy chain installation
(see page 19), the KM0216 / KM0432 has a station ID of
01 .
On a daisy chain installation, the KM0216 / KM0432 auto-senses its
position and displays the Station ID that corresponds to its place in the
chain. (see
Port ID Numbering , page 28, for details).
4. System Reset Button
Pressing and holding in this switch for more than three seconds performs a
system reset.
Note: This switch is semi-recessed and must be pushed with a thin
object—such as the end of a paper clip or a ballpoint pen.
5. Firmware Upgrade Recovery Switch
During normal operation and while performing a firmware upgrade, this
switch should be in the NORMAL position. See page 55 for firmware
upgrade recovery details.
Color Condition Indication
Amber Steady Port is selected; connected computer is on
Flashing Port is selected; port is cascaded to a powered on
KVM switch
Red Steady Port is selected; connected computer is off
Green Steady Port is not selected; connected computer is on
Flashing Port is not selected; port is cascaded to a powered on
KVM switch
Off Port is not selected; connected computer is off