KL3116 / KL3116T User Manual
72
Clear Login Information
If you are unable to perform an administrator login (because the username and
password information has become corrupted, or you have forgotten it, for
example), you can clear the login information with the following procedure:
1. Power off the switch and remove the top cover from the unit chassis.
2. Short the jumper labeled
Default Password
(J17) on the switch's main board.
3. Power on the switch.
When you power the switch on, the following message appears on the
LCD display:
USERNAME AND PASSWORD INFORMATION HAS BEEN CLEARED.
PLEASE POWER OFF THE SWITCH, REMOVE THE JUMPER, CLOSE
THE CASE, THEN RESTART.
4. After you follow those instructions and start back up, the OSD login
function acts exactly the way it did the first time the switch was run
(see
, page 31) and you can use the default Username and
Password to log in.
J17
kl3116-3116t.book Page 72 Wednesday, June 1, 2011 1:28 PM
