manualshive.com logo in svg

Altuscn KN2116a, Руководство пользователя

Поделиться
Скачать
Altuscn KN2116a Скачать руководство пользователя страница 205

 Chapter 10. Maintenance

189

Adapter Firmware Upgrade

The 

Upgrade Adapters

 page is used to upgrade the firmware of the KVM 

Adapter Cables.

To perform the upgrades, do the following:

1. Log in to the KVM Over the NET™ switch; click the 

Maintenance

 tab; 

select the 

Upgrade Adapters

 menu item:

2. Click 

Adapter Firmware Info

 to bring up a list of the adapter firmware 

versions that are stored in the main firmware. If you upgraded the main 
firmware, it may contain newer versions of the adapter firmware than the 
versions currently on the adapters.

3. Compare the adapter firmware versions stored in the main firmware with 

the versions listed in the 

F/W Version

 column of the Main Panel. If the 

versions stored in the firmware are newer than the ones on the adapters, 
you will probably want to perform the adapter upgrade.

4. In the 

Name

 column of the Main Panel, check the ports whose Adapters 

you want to upgrade.

Содержание KN2116a



















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды