Altura Photo AP-UNV1, Руководство пользователя

Страница: 14 / 22

5. S2 Mode
• This is the second mode to use when you want to take pictures using this flash
as a slave.
• Use this mode when your built in camera flash or master flash is set to TTL
mode.
6. Automatic Save Function
• The last flash settings that you had before turning off the flash will be
automatically saved. The settings will be saved even if you change the batteries.
7. PC Synchronous Port Output
• By connecting to this port you can remove the flash from the hotshoe. When
the flash sync is triggered, a signal is sent from the camera along the wire to the
flash telling it to fire.