Altronix TROVE Trove2KS2, Руководство по установке

Страница: 4 / 8

- 4 - TroveKS
Installation Instructions for Keri Systems Boards to TKS2:
1. Fasten standoffs (provided) into pem configuration (A) or (B) of backplane (Fig. 3, pg. 4).
2. Mount boards to standoffs utilizing 5/16” pan head screws (provided) (Fig. 3a, pg. 4).
Note: Keri Systems NXT-2D-MSCNE and NXT-4D-MSCNE boards have one (1) RJ45 jack each.
Please make sure that they are mounted correctly, as shown in Fig. 3 below.
3. Mount backplane to enclosure with hardware.
If use of NXTWI or NXTRM3 expansion boards is desired, there is no need to remove
NXT-2D-MSCNE, NXT-4D-MSCNE or NXT-4X4NE from the TKS2.
Access Controller Position Chart for the Following Models:
Keri Systems Board Pem Mounting
NXT-2D-MSCNE, NXT-4D-MSCNE A
NXT-4X4NE B
Pem
Standoff
Keri Systems
Board
Backplane
Pan Head
Screw
Fig. 3a
Fig. 3
RJ45 Jack
RJ45 Jack
RJ45 Jack RJ45 Jack
RJ45 Jack
RJ45 Jack
A
A
A
A
A
A
B
B
B