Trove1SP1 / TSP1 Installation Guide
- 3 -
Configuration of Altronix Power Supply and/or Sub-Assemblies and
Suprema CoreStation module:
1. Fasten metal and snap on spacers (provided) to pems which match the hole pattern for Altronix Power Supply/Chargers or Altronix
Sub-Assembly boards
(Fig. 2, 2a, pg. 3)
. Note: Please fasten metal and snap on spacers in the proper locations
(Fig. 2, pg. 3)
.
2. Mount boards to spacers utilizing 5/16” pan head screws (provided)
(Fig. 2, pg. 3
).
3. Mount module to spacers utilizing 5/16” pan head screws (provided)
(Fig. 2, 2a, pg. 3)
.
Note: Suprema CoreStation modules have one (1) RJ45 jack each. Please make sure that it is mounted correctly, as shown in
Fig. 2
below.
4. Fasten backplane to Trove1 enclosure utilizing pan head screws (provided).
Fig. 2
Altronix
Power Supply
Metal Spacer Placement
Altronix
Sub-Assembly
Altronix
Sub-Assembly
5
Suprema
CoreStation
RJ45
Pem
Spacer
Suprema CoreStation
module
Backplane
Pan Head
Screw
Fig. 2a
