Altronix SMPWP Series, Руководство по установке

Страница: 3 / 8

SMPWP Series Installation Guide - 3 -
CAUTION: Equipment to be installed / serviced by authorized / trained personnel only.
Shut branch circuit power before installing / servicing equipment.
WARNING: When installing in a non-restricted service area, use lock or other fastened means on door
latches. This installation should be made by qualified service personnel and should conform to the
National Electrical Code and all local codes.
LED Diagnostics:
Red (DC) Green (AC) Power Supply Status
ON ON Normal operating condition.
ON OFF Loss of AC. Stand-by battery supplying power.
OFF ON No DC output. Short circuit or thermal overload condition.
OFF OFF No DC output. Loss of AC. Discharged or no battery present.
Terminal Identification:
Terminal Legend Function/Description
– DC +
SMP3WP: 12VDC or 24VDC @ 2.5A supply current.
SMP5WP: 12VDC or 24VDC @ 3.5A supply current.
SMP7WP: 12VDC or 24VDC @ 6A supply current.
SMP7WPV: 12VDC or 24VDC @ 6A supply current.
– BAT + Stand-by battery connections. Maximum charge rate 500mA.
Right Panel Left Panel
Suggested Locations
for Wire Entries
Bottom Panel
Suggested Locations
for Wire Entries
Fig. 1