R615DCUL Series
- 3 -
10. Power switch with built-in circuit breaker:
OFF position - Switch not illuminated. Outputs not powered.
ON (RESET) position - Switch illuminated. Outputs powered.
Circuit breaker tripped - Switch not illuminated. Power LEDs on faceplate are not illuminated.
Outputs not powered. To reset circuit breaker set power switch to the ON (RESET) position (Fig. 1e, pg. 3).
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.
This installation should be made by qualified service personnel and should conform to the National
Electrical Code and all local codes.
CAUTION: Equipment to be installed / serviced by authorized / trained personnel only.
Shut branch circuit power before installing / servicing equipment.
ALTRONIX CORP.
BROOKLYN, NY 11220
MADE IN USA
P
N
Trimpot
(Green Wire
Earth GND)
XFMR
+ AC --
+ DC --
Power Supply
Board
ALTRONIX CORP.
BKLYN, NY 11220
MADE IN U.S.A.
Power
LEDs
Power
LEDs
Power
LEDs
Power
LEDs
PTC1
Used
on PTC
Models
Strain Relief
Line Cord
Trimpot
Power Switch
XFMR
Removable Terminal
Block
Fig. 1
Fig. 1e
Fig. 1b
Fig. 1c
Fig. 1d
Fig. 1a
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user
to the presence of an insulated DANGEROUS VOLTAGE within the product’s enclosure that may
be of sufficient magnitude to constitute an electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying
the appliance.
CAUTION: To reduce the risk of electric shock do not open
enclosure. There are no user serviceable parts inside. Refer servicing
to qualified service personnel.
