Altronix PT2724, Руководство по установке

Страница: 7 / 8

PT2724 - 7 -
H. Tandem Relay Mode:
To operate in the Tandem Relay Mode, turn switch SW2 ON. This mode setting will allow events
programmed for Channel A and Channel B to operate both relays simultaneously (1 DPDT relay output).
This setting doubles the amount of programmable events.
Note:
When using the Tandem Relay mode, sequential On/Off or Off/On events must be programmed in
the same channel. (If there is a Channel Program conflict, such as CH A is set to ON and Channel B is set
to OFF. The ON command will override the OFF and both relays will remain ON.
PT2724
Board Dimensions
(L x W x H approximate)
:
5.25” x 3.6” x 1” (133.4mm x 91.4mm x 25.4mm).
5.25"
133.4mm
3.6"
91.4mm
0.14"
3.6mm
0.14"
3.6mm
4.9"
124.5mm
2.4"
61mm
Ø0.156"
3.9mm
PT2724E
Enclosure Dimensions
(H x W x D approximate)
:
8.5” x 7.5” x 3.5” (215.9mm x 190.5mm x 88.9mm)
1.25”
(31.75mm)
1.25”
(31.75mm)
1.25”
(31.75mm)
1.125”
(28.575mm)
1”
(25.4mm)
1”
(25.4mm)
1”
(25.4mm)
5.25”
(133.35mm)
6.05”
(153.67mm)
6.05”
(153.67mm)
3.5”
(88.9mm)
3.5”
(88.9mm)
7.25”
(184.15mm)
2”
(50.8mm)
2”
(50.8mm)
8.125”
(206.375mm)
0.6”
(15.24mm)
1”
(25.4mm)
1”
(25.4mm)
0.6”
(15.24mm)
0.6”
(15.24mm)
1.125”
(28.575mm)
0.6”
(15.24mm)
3.625”
(184.15mm)