www.altronix.com
- 3 -
NetWaySP4P / NetWaySP4P2
7. When the use of stand-by batteries is required, they must be sealed lead acid or gel type. Use 14 AWG or larger for all power connections. Connect four (4) 12VDC batteries in
series to terminals marked [+BAT–] (Fig. 2h, pg. 2)
Note: When batteries are not used, a loss of AC will result in a loss of output voltage.
Fig. 2
2a LED indicates AC Power is present.
2b 1Gb SFP port.
2c LED indicates fiber link.
2d 120W max output
2e RJ45 connects to switch
2f IEC 320 Connector: 115/230VAC (grounded line cord included).
2g Built-in battery charger: Charges stand-by batteries for
applications requiring back-up.
(Optional rack mount battery enclosure available - RE2)
Typical Application:
Fig. 3
Technical Specifications:
Parameter
Description
Number of Ports
Four (4) Gigabit SFP Ports. Four (4) ports 10/100/1000Mbps.
Power Outputs
NetWaySP4P: Four (4) 56VDC non power-limited outputs 120W max.
NetWaySP4P2: Four (4) 56VDC power-limited outputs @ 60W each.
Input power requirements
115VAC, 60Hz, 3.25A or 230VAC, 50/60Hz, 2.0A.
Environmental Conditions
Operating Ambient Temperature: 120W: -40ºC to 50ºC (-40ºF to 122ºF)
Relative Humidity: 85%, +/- 5%
Storage Temperature: -40ºC to 85ºC (-40ºF to 185ºF).
Operating Altitude: -304.8 to 2,000m (-1,000 to 6,561.679 ft.).
Weights (approx.)
Product: 3.8 lbs. (1.7kg) | Shipping: 6.0 lbs. (2.7kg)
Rear Panel
Front Panel
2b
2d
2a
2c
2e
2f
2g
Data
115/230VAC
Input
Stand-by Battery
Connections
Rear Panel
Front Panel
PoE+
Camera
Copper
Fiber
Composite (Powered) Fiber Cable
PoE+
Camera
WiFi Access
Point
Copper
Fiber
NetWay Spectrum
PoE Hardened Switch
PoE+
Camera
PoE+
Camera
WiFi Access
Point
NetWay Spectrum
PoE Hardened Switch