NetWaySP1BT Series
- 5 -
Input/Data Connections:
1 . Connect structured cable from port marked [Data Port] on NetWaySP1BT to a PoE midspan/endspan
(Fig. 3, pg. 5)
.
2 . Connect fiber optic cable to a fiber SFP module . Connect the module to the port marked [SFP] on the
NetWaySP1BT . Connect the other end of fiber cable to an SFP module of a remote device .
SFP LED will illuminate indicating data connection
(Fig. 3, pg. 5)
.
3 . Using 4-pair CAT5e or higher cable connect PoE load device to be powered to the port marked
[802 .3bt Output] on NetWaySP1BT . After authentication and classification have been established,
[PoE Signal] LED will illuminate indicating PoE presence .
Ethernet Data Port
Yellow LED
10/100 Mbps
Green LED 1000 Mbps
IEEE 802.3af, 802.3at and 802.3bt
compliant port rated up to 90W max
48VDC to 56VDC
Input
-- +
SFP LED Indicates
data connection
PoE LED indicates PoE present
One (1) Gb SFP port
for Fiber
48-56VDC
– Input +
802.3bt
Output
Data
Port
Fiber
Signal
PoE
Signal
SFP
Ground Terminal
Fig. 3
NetWaySP1BT
Converts Ethernet or Fiber to
802.3bt PoE port
Fiber
OR
CAT5e/6
CAT5e/6
PoE+ (90W) PTZ
Data from Midspan/Endspan
From power supply
NetWaySP1BT
802.3bt Converter/Injector
Input:
48–56VDC
Output:
IEEE 802.3bt (90W)
48-56VDC
-- Input +
802.3bt
Output
Data
Port
Fiber
Signal
PoE
Signal
SFP
Typical Application:
Fig. 4
