- 4 -
HubWayLD8DS
AC POWER
PICTURE
GAIN
PICTURE
GAIN
PICTURE
GAIN
PICTURE
GAIN
PICTURE
GAIN
PICTURE
GAIN
PICTURE
GAIN
PICTURE
GAIN
87
65
43
21
24V
AC
OF
F
28V
AC
--
DA
TA
+
1
2
3
4
5
6
7
8
CH 1-
4
CH 5-
8
1-
8
1h - Channels 1-8:
CAT-5 or higher
structured cable to Video/Balun
Combiners at cameras 1-8. When linking
HubWay UTP Transceiver Hubs
to HubSat Remote Accessory Modules,
any of these jacks will facilitate
data
transmission for PTZ control.
1d - BNC Connector:
Video outputs to head end
equipment (DVR).
1a - Output voltage switches:
Selects 24VAC/28VAC/OFF
for each output.
1g - Channels 1-4 & Channels 5-8:
Links HubSat units enabling video transmission of up to
four (4) cameras over a single CAT-5 structured cable.
1f - IEC 320 Connector:
115VAC/230VAC 50/60Hz
(grounded line cord included).
Fig. 1
1c - Data:
Removable
terminal blocks for RS422/
RS485 input from head end
equipment (DVR) for PTZ control.
+ --
Data input fr
om
Head End Equipment (DVR).
To
p View
1k - Input Voltage Switch:
Selects 115VAC 60Hz/230VAC
50/60Hz (switch is located on
the left side of the unit).
115
VA
C 220V
AC
1b - LED(s) 1-8:
Power indicators.
1i - Picture:
Adjusts video
quality.
1j - Gain:
Regulates the
output video
and sync levels.
1e - LED(s) 1-8:
Video signal
indicators.
Rear
