Altronix HubSat42Di, Руководство по установке

Страница: 6 / 12

- 6 - HubSat4Di Installation Guide
1a - BNC Connector: Video in from remote camera video out to DVR.
1b - Output PTCs: Protects each output.
1c - Power Terminals: 24VAC/28VAC power outputs.
1d - Output Voltage Switches: Selects 24VAC/28VAC/OFF for each output.
1e - LED(s) 1-4: Power output indicators.
1f - Data: RS422/RS485 input from head end equipment (DVR) for PTZ control.
1g - Channels 1-4: Single CAT-5 or higher structured cable out to HubWay, HubWayLD or HubWayLDH enables
transmission of up to four (4) video signals. Pin out configuration (Fig. 3, pg. 7).
1h - Data: CAT-5 or higher structured cable to data port on HubWay, HubWayLD or HubWayLDH or
head end equipment (DVR).
1i - Channels 1-4: CAT-5 or higher structured cable to cameras. Pin out configuration (Fig. 3, pg. 7).
Fig. 1 - HubSat4Di Circuit Board
PVD1
VIDEO1 VIDEO2 VIDEO3 VIDEO4
PVD2 PVD3 PVD4
+ D
ATA
-
DATA 1-4 VIDEO 1-4
28VAC
24VAC
28VAC
24VAC
28VAC
24VAC
28VAC
24VAC
OFF OFF OFF OFF
AUX1 AUX2 AUX3 AUX4
1a
1i
1b
1c 1d
1e
1f
1g 1h
1c