Altronix eBridge8E, Руководство по установке

Страница: 2 / 12

www.altronix.com - 2 - eBridge8E
Overview:
The eBridge8E is an all-in-one head-end solution for upgrading coax to IP that combines a PoE+ switch and EoC Receiver into a single integrated unit for upgrading
existing coax infrastructure and deploying the latest IP devices. This 8-Port Managed EoC Receiver with Integral PoE+ switch provides 30W full power per port (240W
max) at 10/100/1000Mbps. Feature also include an integral battery charger for applications requiring backup and embedded LINQ Technology to monitor, control and
report power and diagnostics from anywhere.
Features:
Installation Instructions:
Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having jurisdiction. Wiring should
be UL Listed and/or Recognized wire suitable for the application.
eBridge8E is not intended to be connected to outside plant leads and should be installed indoors within the protected premises. The eBridge8E is intended for indoor
use only. This product is intended to be supplied by a UL Listed Power Supply rated from 48VDC to 56VDC.
Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room
ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified
by the manufacturer.
Agency Listings:
• CE approved.
Input:
• 115VAC 60Hz, 3A or 230VAC 50/60Hz, 1.6A.
Power Output:
• 8-ports maximum power: 30W full power per port (PoE+).
• 240W total power.
• Generates PoE/PoE+ up the coax to eBridge transceiver.
Ethernet Uplink:
• 1Gb uplink (10/100/1000Mbps)
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair Cat-5 or better structured cable.
• Distance: up to 100m.
Ethernet over Coax:
• Speed: 10/100BaseT, half/full duplex, auto negotiation.
• Throughput is rated to pass 25mbps of data at distances up to 500m.
With proper headend equipment multiple Megapixel cameras can be used.
Coax:
• Distance: up to 500m.
• Connectivity: BNC, RG-59/U or similar.
LED Indicators:
• Blue LED - Coax link connection.
• Yellow and Green LED (RJ45) IP Link status, 10/100Base-T/active.
• Green LED - Power.
Battery Backup:
• Built-in charger for sealed lead acid or gel type batteries.
• Automatic switch over to stand-by battery when AC fails.
Environmental:
• Operating Temperature: -10ºC to +50ºC (14ºF to 122ºF).
• Storage Temperature: -30º to +70ºC (-22º to 158ºF).
• Humidity: 20 to 85%, non-condensing.
Compatible Transceivers:
•
eBridge1PCTX: Single port ethernet/PoE or PoE+ transceiver.
Power comsumption: 1.5W.
•
eBridge1ST: Single port ethernet/PoE or PoE+ mini-transceiver.
Power comsumption: 1.5W.
Accessories:
•
RE2: Rack Mount Battery Enclosure.
Applications:
• Eliminates the costs and labor associated with installing new network cabling.
• Retrofit digital IP cameras in an analog CCTV installation.
• Works with Megapixel, HD720, HD1080 & VGA (SD) cameras (see note, pg. 2).
• Extend Network link distance in an industrial environment.
• Upgrade deployed CCTV Coax to a digital network
for Retail, Casinos, Airports, Schools, Hospitals, etc.
LINQ Technology:
• Built-in IP management allows for remote camera reset and monitoring.
• Provides local and/or remote access to critical information via LAN/WAN
• Email and SNMP trap message notifications report real-time diagnostics.
• Event log tracks history.
Mechanical:
• Dimensions (H x W x D approx.):
1.625” x 19.125” x 8.5” (42mm x 486mm x 216mm)