Altronix eBridge8E, Руководство по установке

Страница: 10 / 12

www.altronix.com - 10 - eBridge8E
B
A
C
Mounting Hardware
(Included):
Two (2) mounting brackets
Six (6) flat head screws
for mounting brackets.
Four (4) rubber pads.
Mounting Options:
Rack Mount Installation
1- Remove and discard factory installed screws from both sides of rack chassis (Fig. 6a).
2- Install mounting brackets (A) on the left and right side of rack chassis using the four (4) flat head screws (B) (included) (Fig. 6b).
3- Place unit into desired EIA 19” rack position and secure with mounting screws (not included) (Fig. 6c).
Fig. 6
Fig. 6a
Fig. 6b Fig. 6c
Shelf Installation
1- Position and affix rubber pads (C) (included) at each corner on the bottom of the unit (Fig. 7).
2- Place unit in desired location.
Fig. 7
A
B
Top
Top Top
Front
Left
Front
Left
Front Left
Remove
C
Left Side
Rubber Pad