Altronix eBridge4PCRM, Руководство по установке

Страница: 2 / 8

- 2 - eBridge4PCRM
Overview:
Altronix eBridge4PCRM and eBridge1PCTX or eBridge1ST are CAT5 to Coax cable Ethernet adapters/Media
converters that deliver data and power over the coax cable in a PoE+ compliant format. The paired set enables
fast 10/100Base-T Ethernet digital communication to be transmitted over Coax cable. eBridge4PCRM receiver
is powered by a UL Listed limited power source, PoE midspan or endspan product, such as a NetWay8M and
NetWay16M, and sends its power over the coax to the eBridge 1PCTX or eBridge1ST transmitter under PoE
protocol. This enables eBridge4PCRM to be used in a managed manner, allowing for remote camera reset.
eBridge1PCTX or eBridge1ST, in turn, delivers that PoE+ compliant power to a PoE enabled camera or IP
device. eBridge4PCRM will not deliver power to non-compliant devices, thus avoiding damage to improperly
connected analog cameras. These plug and play units facilitate system upgrades from analog to IP cameras/
devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new net-
work cabling. In addition, data transmission and power over the Coax is possible up to 500m in comparison to
100m Ethernet maximum distance (see Maximum Length of Coax Type vs. Camera Power/PoE Class, pg. 6). A
maximum range from head end to the PoE camera/device is 700m, taking into consideration that up to 100m of
structured cable may be deployed at each end.
Features:
Agency Listings:
• UL 60950-1 Information Technology Equipment.
• CE European Conformity.
• C-Tick C-Tick compliant.
Compatible Transceivers:
• eBridge1PCTX: PoE/PoE+ compliant transceiver.
• eBridge1ST: PoE/PoE+ compliant mini transceiver.
Input:
• Powered by a UL Listed limited power source,
PoE midspan or endspan.
Ethernet:
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5 or better structured cable.
• Distance: up to 100m.
• Speed: 10/100BaseT, half/full duplex,
auto negotiation.
PoE compliant to IEEE 802.3af (15W) and
PoE+ compliant to IEEE 802.3at (30W) delivered
to camera by eBridge1PCTX or eBridge1ST.
Power provided by eBridge4PCRM to
eBridge1PCTX or eBridge1ST by PoE protocol.
• Throughput is rated to pass 25Mbps of data at
distances up to 500m. With proper headend
equipment this supports Megapixel, HD720, HD1080.
Coax:
• Distance: up to 500m (see Maximum Length of
Coax Type vs. Camera Power/PoE Class, pg. 6)
for power delivery of coax.
• Connectivity: BNC, RG-59/U or similar.
LED Indicators:
• eBridge4PCRM:
Blue LED - Coax link connection.
Green - PoE ON.
Green - Power ON.
• eBridge4PCRM and eBridge1PCTX:
Yellow and Green LED (RJ45) IP Link status,
10/100Base-T/active.
• eBridge1PCTX and eBridge1ST:
Blue LED - Coax link connection.
Green LED - PoE from eBridge4PCRM.
Environmental:
• Operating Temperature:
eBridge4PCRM:
–20ºC to 49ºC (–4ºF to 120.2ºF).
eBridge1PCTX:
For 15W: –40ºC to 75ºC (–40ºF to 167ºF).
For 30W: –40ºC to 49ºC (–40ºF to 120.2ºF).
eBridge1ST:
For 15W: –40ºC to 75ºC (–40ºF to 167ºF).
For 30W: –40ºC to 65ºC (–40ºF to 149ºF).
•
Storage Temperature:
–30º to 70ºC (–22º to 158ºF).
• Humidity: 20 to 85%, non-condensing.
Functions:
• Auto detection and protection of legacy
non-PoE cameras/devices.
Applications:
• Retrofit digital IP cameras in an analog
CCTV installation.
• Works with Megapixel, HD720, HD1080 and
VGA (SD) cameras (see note, pg. 2).
• Extend Network link distance in an industrial
environment over 700m (see note, pg. 2).
• Upgrade deployed CCTV Coax to a digital network
in Retail, Hospitality, Arenas, Casinos, Airports,
Schools, Hospitals, Transportation, etc.
Mechanical:
• Dimensions (H x W x D approx.):
eBridge4PCRM dimensions:
1.7” x 5.23” x 8.42”
(43.2mm x 132.8mm x 213.9mm)
eBridge1PCTX dimensions:
1” x 2.5” x 4.375”
(25.4mm x 63.5mm x 111.1mm).
eBridge1ST dimensions:
2.27” x 2.645” x 1.12”
(57.7mm x 67.2mm x 28.4mm).