eBridge1PCRMT
IP and PoE+ over Coax Solution
Rev. 032113
Installation Guide
PLUS
Z1409
I.T.E. 43KC
eBridge1PCRM Receiver and eBridge1PCTX Hardened Transceiver Kit
Overview:
eBridge1PCRM and eBridge1PCTX are CAT5 to Coax cable Ethernet adapters/Media converters that deliver
data and power over the coax cable in a PoE+ compliant format. The paired set enables fast 10/100Base-T
Ethernet digital communication to be transmitted over Coax cable. eBridge1PCRM receiver is powered by a
PoE midspan or endspan product, such as NetWay8M and NetWay16M and sends its power over the coax to
eBridge1PCTX transmitter under PoE protocol. This enables eBridge1PCRM to be used in a managed man
ner, allowing for remote camera reset. eBridge1PCTX, in turn, delivers that PoE+ compliant power to a PoE
enabled camera or IP device. eBridge1PCRM will not deliver power to non-compliant devices, thus avoiding
damage to improperly connected analog cameras. These plug and play units facilitate system upgrades from
analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated
with installing new network cabling. In addition, data transmission and power over the Coax is possible up to
500m in comparison to 100m Ethernet maximum distance (see Maximum Length of Coax Type vs. Camera
Power/PoE Class, pg. 3). A maximum range from headend to the PoE camera/device is 700m, taking into
consideration that up to 100m of structured cable may be deployed at each end.
Features:
Agency Listings:
• UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
• CE approved.
• C-Tick compliant.
Input:
• Powered by midspan or endspan.
Local Aux. Input Power for eBridge1PCRM:
• 24VDC/110mA or 24VAC/200mA.
Ethernet:
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5 or better structured cable.
• Distance: up to 100m.
• Speed: 10/100BaseT, half/full duplex, auto
negotiation. PoE compliant to IEEE 802.3af
(15W) and PoE+ compliant to IEEE 802.3at
(30W) delivered to camera by eBridge1PCTX.
Power provided by eBridge1PCRM to
eBridge1PCTX by PoE protocol.
Coax:
• Distance: up to 500m (see Maximum Length of
Coax Type vs. Camera Power/PoE Class, pg. 3)
for power delivery of coax.
• Throughput is rated to pass 25Mbps of data at
distances up to 500m. With proper headend
equipment this supports Megapixel, HD720,
HD1080.
• Connectivity: BNC, RG-59/U or similar.
LED Indicators:
• eBridge1PCRM:
Blue LED - Coax link connection (sloc).
Green - PoE ON.
Green - Power ON.
• eBridge1PCRM and eBridge1PCTX:
Yellow and Green LED (RJ45) IP Link status,
10/100Base-T/active.
LED Indicators
(cont’d)
:
• eBridge1PCTX:
Blue LED - Coax link connection.
Green LED - PoE from eBridge1PCRM.
Environmental:
•
Operating Temperature:
eBridge1PCRM:
-20ºC to 49ºC (-4ºF to 120.2ºF).
eBridge1PCTX:
For 15W: -40ºC to 75ºC (-40ºF to 167ºF).
For 30W: -40ºC to 49ºC (-40ºF to 120.2ºF).
•
Storage Temperature:
-30ºC to 70ºC (-22ºF to 158ºF).
• Humidity: 20 to 85%, non-condensing.
Functions:
• Auto detection and protection of legacy
non-PoE cameras/devices.
Applications:
• Retrofit digital IP cameras in an analog
CCTV installation.
• Works with Megapixel, HD720, HD1080 and
VGA (SD) cameras (see note, pg. 2).
• Extend Network link distance in an industrial
environment over 700m (see note, pg. 2).
• Upgrade deployed CCTV Coax to a digital
network in Retail, Hospitality, Arenas, Casinos,
Airports, Schools, Hospitals, Transportation, etc.
Mechanical:
• Dimensions (W x L x H approx.):
eBridge1PCRM:
3.5” x 4.375” x 1”
(88.9mm x 111.1mm x 25.4mm).
eBridge1PCTX:
2.5” x 4.375” x 1”
(63.5mm x 111.1mm x 25.4mm).
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
