- 2 -
IIisolated 220 series
Overview:
Altronix Isolated CCTV Power Supplies provide 24VAC distributed via eight (8) or sixteen (16) fuse or PTC protected
isolated outputs for powering CCTV cameras, heaters, and other video accessories.
220 Isolated Power Supply Reference Chart:
Altronix
Model Number
Output
Voltage
Total
Output
Current
(Power)
Number of
Outputs
PTC Protected
Outputs
(auto-resettable)
Fuse
Protected
Outputs
Output
Current
(max per
output)
220VAC
50/60Hz Input
Current
ALTV248Hi220
24VAC
14A
8
-
P
1.75A
2.7A
ALTV248CBHi220
P
-
ALTV248Mi220
12.5A
-
P
1.6A
2.7A
ALTV248CBMi220
P
-
ALTV2416i220
28A
16
-
P
1.75A
5.4A
ALTV2416CBi220
P
-
Specifications:
Installation Instructions:
1. Mount unit in the desired location.
2. Set power switch to the OFF positon on all models (Figs. 1-3, pgs. 3-5).
3. All units are factory set for 24VAC operation.
4. Connect AC power to the black and white flying leads of the transformer(s) (Figs. 1-3, pgs. 3-5).
Use 18 AWG or larger for all power connections.
5. Measure output voltage before connecting devices. This helps avoiding potential damage.
Terminals marked [1A - 8A] and [1B - 8B] are of the same polarity (phase).
6. Connect CCTV cameras to the output terminals using the following procedure:
Camera 1 to output 1A and 1B.
Camera 5 to output 5A and 5B.
Camera 2 to output 2A and 2B.
Camera 6 to output 6A and 6B.
Camera 3 to output 3A and 3B.
Camera 7 to output 7A and 7B.
Camera 4 to output 4A and 4B.
Camera 8 to output 8A and 8B.
7. Set power switch on all models to the “RESET” (ON) position (Figs. 1-3, pgs. 3-5).
8. Upon completion of the wiring, secure enclosure door with screws (supplied).
CAUTION: Equipment to be installed/serviced by authorized/trained personnel only.
Shut branch circuit power before installing/servicing equipment.
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.
This installation should be made by qualified service personnel and should conform to the National
Electrical Code and all local codes.
Terminal Identification:
PD8I - Power Distribution Module
1A - 8A
Phase 1.
1B - 8B
Phase 2.
Features:
• Illuminated master Power ON/OFF switch
w/built in circuit breaker.
• Unit maintains camera synchronization.
• Ease of installation saves time and eliminates costly labor.
• Spare fuses included (on fuse protected models).
Enclosure Dimensions
(H x W x D approximate)
:
ALTV248Mi220 and ALTV248CBMi220:
8.5” x 7.5” x 3.5” (215.9mm x 190.5mm x 88.9mm)
ALTV248Hi220, ALTV248CBHi220,
ALTV2416i220, and ALTV2416CBi220:
13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.55mm)
