Altronix AL300X220 Series, Руководство по установке

Страница: 5 / 8

AL300X220 Series - 5 -
Terminal Identification:
Power Supply Board
Terminal Legend Function/Description
L, G, N
Connect 220VAC (working range 198VAC - 256VAC), 50/60Hz to these terminals:
L to Hot, N to Neutral. Do not use the [G] terminal.
+ DC – 12VDC or 24VDC @ 2.5A continuous power-limited output.
AC Fail
NC, C, NO
Indicates loss of AC power, e.g. connect to annunciator/alarm panel. Relay normally ener-
gized when AC power is present. Contact rating 1A @ 28VDC. AC Fail condition will report
approximately within one (1) minute after loss of AC. To delay report for 6 hours cut jumper
J1 on the Power Supply Board (AC trouble output delay option). If this mode is selected, the
Power Supply Board must be reset by removing all power to it for 30 seconds.
Bat Fail
NC, C, NO
Indicates low battery condition, e.g. connect to alarm panel. Relay normally energized
when DC power is present. Contact rating 1A @ 28VDC. Low battery conditions will report
approximately 21VDC (24VDC output setting) or approximately 10.5VDC (12VDC output
setting). Battery presence detection will report approximately 1 minute after battery remains
undetected (missing or removed).
+ BAT – Stand-by battery connections. Maximum charge current 0.7A.
Power Distribution Module
Terminal Legend
Function/Description
PD4/PD4CB PD8/PD8CB
1P to 4P 1P to 8P Positive DC power outputs.
1N to 4N 1N to 8N Negative DC power outputs.
Power Distribution Module(s):
Fig. 2a - PD4 Power Distribution Board Fig. 2b - PD4CB - Power Distribution Board
Fuse Protected Outputs PTC Protected Outputs
Fig. 3a - PD8 Power Distribution Board Fig. 3b - PD8CB - Power Distribution Board
Fuse Protected Outputs PTC Protected Outputs
LED
F1 F2 F3 F4
1P 1N 2P 2N 3P 3N 4P 4N
DC Output to devices
1P-4P Power Outputs,
1N-4N Common Outputs
From Power Supply
Board
(Factory Installed)
Replace fuses with the same type and rating 3.5A/250V
N
COMMON POWER OUTPUTS
P
FUSED POWER OUTPUTS
1 2 3 4 5 6 7 8
D1
INPUT
R1
LED
DC Output to devices
1P-8P Power Outputs,
1N-8N Common Outputs
From Power Supply
Board
(Factory Installed)
Replace fuses with the same type and rating 3.5A/250V
LED
F1 F2 F3 F4
1P 1N 2P 2N 3P 3N 4P 4N
DC Output to devices
1P-4P Power Outputs,
1N-4N Common Outputs
From Power Supply
Board
(Factory Installed)
N
COMMON POWER OUTPUTS
P
FUSED POWER OUTPUTS
1 2 3 4 5 6 7 8
D1
INPUT
R1
LED
DC Output to devices
1P-8P Power Outputs,
1N-8N Common Outputs
From Power Supply
Board
(Factory Installed)