AL168CB Series Installation Guide
- 3 -
CAUTION:
Determine the maximum operating voltage of the equipment being powered before adjusting
the output voltage.
6. Connect devices to terminals marked [1P] - [1N] through [4P] - [4N] on PD4CB board
(Figs. 3, 5, pgs. 6, 8)
or terminals marked [1P] - [1N] through [8P] - [8N] on PD8CB board
(Figs. 1, 2, and 4, pgs. 4-5, 7)
,
carefully observing polarity.
7. Turn main switch to the “RESET” (ON) position (except AL168CB)
(Figs. 2-5, pgs. 5-8)
.
8. Green LED will illuminate when unit is powered.
9. Upon completion of the wiring secure enclosure door with screws (supplied).
Caution: Equipment to be installed/serviced by authorized/trained personnel only.
Shut branch circuit power before installing/servicing equipment.
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.
This installation should be made by qualified service personnel and should conform to the National
Electrical Code and all local codes.
Terminal Identification:
PD4CB/PD8CB - Distribution Module
1P - 4P
AC output.
1N - 4N
AC output.
LED Diagnostics:
PD4CB/PD8CB - Power Distribution Module
Green (AC)
Power Distribution Module Status
ON
Normal operating condition.
OFF
No Power Output.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user
to the presence of an insulated DANGEROUS VOLTAGE within the product’s enclosure that may be of
sufficient magnitude to constitute an electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
CAUTION:
To reduce the risk of electric shock do not open
enclosure. There are no user serviceable parts inside.
Refer servicing to qualified service personnel.
Содержание AL168 Series
Страница 9: ...AL168CB Series Installation Guide 9 Notes...
