A1018B – OUTDOOR RECEIVER KIT (REMOTE SWITCH UHF 12/24Vd.c.)
Then press the key on the radio remote control that
you want to delete.
2.
Deleting all codes acquired (Reset unit) - Press P2
button until the LED turns on (about 8 seconds) and
then release. Repeat the learning process.
Technical Parameters:
Power Supply
9V - 24V AC / DC
Frequency
433.92 MHz
Max Consumption
200 mA
Decoding
Binary
No. of Max Codes
140
No. of Channels
2
No. of Outputs
NO / NC 2
Max Switching Power
0.5 A / 120 VA
Operating Temperature
-20/ + 50
℃
Working Distance
100 meters
Relay Spec
12A 14V DC or 7A 120V AC
Notes for Installation:
WARNING
! It is important the following manual should
be followed for safety reasons. Store the instructions
for future reference. Anything not expressly envisaged
in these instructions is not permitted.
The packaging materials should be kept out of the reach
of children since they are potentially hazardous.
The product must only be installed by a qualified
installer. Incorrect installation or improper use of the
product can lead to severe damage to property and / or
persons.
The manufacturer declines all responsibility resulting
from improper use of device. Do not modify the device
in any way.
Disconnect the power supply prior to any intervention
on the system. The status of the system has a direct
influence on the reliability and safety of the device.
