manualshive.com logo in svg

Altronic The Game of Life, Настройка и конфигурация

Поделиться
Скачать
Altronic The Game of Life Скачать руководство пользователя страница 24

24

May 2007

The Game of Life™ / Setup and Configuration (APL based)

MACHINE SETUP

This section describes how to carry out a RAM Reset

and the Initial Setup which is required to configure

basic machine settings and carry out jackpot

configuration. A further section describes the diffe-

rent types of top glasses available for The Game of

Life™ machines.

Overview

Atronic machines usually come configured as specified

with the order. However it may be necessary to re-

configure basic machine settings, such as

denomination, metering, paytable, etc. These settings

can not be altered during normal operation, as they

require a machine reinitialisation for technical or

jurisdictional reasons. Applying new progressive jackpot

settings also requires a RAM Reset.

To re-configure basic machine and jackpot settings:

1. Perform a RAM Reset

This will clear all machine data, statistics and set-

tings, including progressive jackpot configuration.

2. Carry out the Initial Setup

After a RAM Reset has been performed, the ma-

chine automatically enters the Initial Setup menu.

The Initial Setup allows to configure all basic ma-

chine setting.

3. Jackpot Configuration

After the Initial Setup has been carried out, it is

necessary to carry out the progressive jackpot con-

figuration. Do not insert credits before the jack-

pot configuration is done.
In an APL link the jackpot configuration has to be

carried out at the APL master machine only. The

jackpot configuration is then transfered to all lin-

ked APL slave machines.

S

ETUP

Содержание The Game of Life


























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды