Altrad Atika RMC 40-510, Оригинальное руководство пользователя

Страница: 17 / 120

16

Observe the safety distance given by the handle bar.

Be especially careful when turning the lawn mower or
pulling it towards you.

While the motor is running, do not

lift or carry the device about

lift the impact guard

Make sure that the impact guard is closed or the collecting
bag is attached.
Use only original spare parts and accessories parts.
Accidents can arise for the user through the use of
other spare parts. The manufacturer is not liable for
any damage or injury resulting from such action.
Do not carry out repair operations on the machine
other than those described in section “Maintenance
and cleaning” but contact the manufacturer or
authorized customer service centres.

Refer to the respective operating instructions for notes on
the safety of the battery and the charger.
Description of device / spare parts
+ +
Pos. Denomination Order-no.
1
Lower handle hoop

2
Upper handle hoop

3
Switch handle

4
Machine knob nut M8
365632
5
Cutting height adjustment

6
Battery compartment

7 Safety knob

8
Impact guard
365623
9
Cup holder
365610
10
Grass catching bag
365624
11
Mulch insert
365625
12A Battery AP 40-2000 (2000 mA) 365501
12C Battery AP 40-4000 (4000 mA) 365503
13
Charging unit ALG 40-1800
365500
14
Cutting blade
365611
15
Safety label
363606
16
Safety key
365622
17 Plastic clamping plate 365619
18
Clamping plate
365620
19
Nut M10 x 1,25
365621
20
Cable bracket (not illustrated)
365617
21
Screw St 4 x 15

22 Running wheel 7‘‘ (Ø 177,8 mm) 365627
23
Wheel cover 7‘‘
365628
24
Running wheel 10‘‘ (Ø 254 mm)
365629
25 Wheel cover 10‘‘ 365630
26
Battery compartment cover

27
Front cover with carrying handle

28 Bracket for handlebar, right

29
Bracket for handlebar, left

30
Clamping lever
365612
31
Filling level indicator of collecting bag

32 Lateral discharge 365626
Assembly
 To achieve perfect function of the machine, follow the
notes given in these instructions
Cup holder
Fasten the cup holder (9) with 4 screws M 4 x 15 on the
upper handlebar (2).
Handle hoop
Fasten the lower handlebar (1) on both brackets (28 and 29).
First insert a screw M8 x 15 through the upper hole and
secure it with a nut M 8

The height of the handle can be adjusted at 2
levels; use either position A or B to fasten the lower
handlebar on the brackets.
Fix the handlebar in the desired position with an M 8 x
15 screw as well as a star knob nut M 8.
Now fasten the upper handlebar (2) on the lower
handlebar (1). Use the clamping levers M 8 x 45 and the
star knob nuts M8 (4)
Fasten the cable on the handlebar using the cable
holders
Grass catching bag
Pull the impact guard (8) up and hold it.
Hook the collecting bag (10) with the hooks into the
holders on the housing (A).

Make sure the discharge opening is clean and does not
contain any deposits.
 The mulch insert and the lateral discharge must not be
attached when working with the collecting bag.
Mulch insert
Pull the impact guard (8) up and hold it.
Insert the mulch insert. Slide the mulch insert into the
opening until the latch engages audibly.
To remove the mulch insert, first press out the notch,
then you can remove the mulch insert.
 The mulch insert must not be attached when working
with the collecting bag.