16
Be especially careful when turning the lawn mower or
pulling it towards you.
While the motor is running, do not
lift or carry the device about
lift the impact guard
Make sure that the impact guard is closed or the collecting
bag is attached.
Use only original spare parts and accessories parts.
Accidents can arise for the user through the use of
other spare parts. The manufacturer is not liable for
any damage or injury resulting from such action.
Do not carry out repair operations on the machine
other than those described in section “Maintenance
and cleaning” but contact the manufacturer or
authorized customer service centres.
Refer to the respective operating instructions for notes on
the safety of the battery and the charger.
Description of device / spare
parts
+
Pos. Denomination
Order-no.
1
Lower handle hoop
2
Upper handle hoop
3
Switch handle
4
Machine knob nut M8
365632
5
Cutting height adjustment
6
Battery compartment
7
Safety knob
8
Impact guard
365607
9
Cup holder
365610
10
Grass catching bag
365608
11
Mulch insert
365609
12A Battery AP 40-2000 (2000 mA)
365501
12C Battery AP 40-4000 (4000 mA)
365503
13
Charging unit ALG 40-1800
365500
14
Cutting blade
365618
15
Safety label
363606
16
Safety key
365622
17
Plastic clamping plate
365619
18
Clamping plate
365620
19
Nut M10 x 1,25
365621
20
Cable bracket (not illustrated)
365617
21
Screw St 4 x 15
22
Running wheel 6‘‘ (Ø 152,4 mm)
365613
23
Wheel cover 6‘‘
365614
24
Running wheel 8‘‘ (Ø 203,2 mm)
365615
25
Wheel cover 8‘‘
365616
26
Battery compartment cover
Assembly
To achieve perfect function of the machine, follow the
notes given in these instructions
Cup holder
Fasten the cup holder (9) with 4 screws M 4 x 15 on the
upper handlebar (2).
Handle hoop
Fasten the lower handlebar (1) with the screws M 8 x 15
and nuts M 8 on both brackets.
Now fasten the upper handlebar (2) with the screws M 8
x 45 and the star knob nuts (4) on the lower handlebar
(1).
You may fold the handlebar to save space. Loosen the
star knob nuts (4) for this purpose and fold the upper
handlebar down.
Grass catching bag
Pull the impact guard (8) up and hold it.
Hook the collecting bag (10) with the hooks into the
holders on the housing (A).
Make sure the discharge opening is clean and does not
contain any deposits.
The mulch insert must not be attached when working
with the collecting bag.
Mulch insert
Pull the impact guard (8) up and hold it.
Insert the mulch insert. Slide the mulch insert into the
opening until the latch engages audibly.
To remove the mulch insert, first press out the notch,
then you can remove the mulch insert.
The mulch insert must not be attached when working
with the collecting bag.
Before starting
Charging the rechargeable battery
The lithium ion batteries and charger are not part of
the scope of delivery and must be purchased
separately. (See “Scope of delivery”)
Use genuine batteries only.
Do not use any other charger to charge the
batteries. The charger is optimally matched to the
batteries. Using an unsuitable charger may present
a risk of shock, overheating or escape of caustic
battery fluid.
