16
EC Declaration of Conformity
No. (S-No.): 18639
according to EC directive:
2006/42/EC
We,
ATIKA GmbH
Josef-Drexler-Str. 8
89331 Burgau
- Germany
herewith declare under our sole responsibility that the product
Hochentaster (Power Pruner) type KSHC 40-20
Serial number:
000001 – 030000
is conform with the above mentioned EC directives as well as
with the provisions of the guidelines below:
2014/30/EU, 2000/14/EC and 2011/65/EU.
Following harmonized standards have been applied:
EN 60745-1:2009+A11:2010; EN ISO 11680-1:2011;
EN55014-1:2006+A1:2009; EN55014-2:2015; EN ISO 3744;
ISO 11201
Conformity assessment procedure: 2000/14/EC –
Appendix V
Measured sound power level L
WA
101.9 dB (A).
Guaranteed sound power level L
WA
96 dB (A).
Duly authorised person for the complilation of technical
documents:
ATIKA GmbH – Technical department – Josef-Drexler-Str. 8 -
89331 Burgau – Germany
Burgau, 28.06.2018
i.A. G. Koppenstein,
Engineering
design
management
Symbols operating manual
Threatened hazard or hazardous situation.
Not
observing this instruction can lead to injuries or
cause damage to property.
Important information on proper handling.
Not
observing this instruction can lead to faults.
User information.
This information helps you to use
all the functions optimally.
Assembly, operation and servicing.
Here you are
explained exactly what to do.
Important notes for environmentally compatible
conduct.
Failure to observe these instructions may
lead to environmental damage.
…
Please refer to the attached assembly
and operating instruction sheet for
references to figure numbers in the text.
Symbols on the power pruner
Memorise the meaning to be able to operate the device more
safely and to protect yourself and other from possible injuries.
Carefully read operator’s manual and the safety
instructions before starting the machine and
observe the instructions when operating.
Wear hardhat, eye and ear protection.
Wear protective gloves.
Wear safety shoes.
Do not expose to rain. Protect against humidity.
Keep other persons away from the work area.
Safety distance at least 6 m.
Do not operate the power pruner near cables,
power or phone lines.
Keep a safety distance of 10 m to overhead power
lines when working with the power pruner.
Pull out the battery
before starting any work (cleaning,
maintenance, repair, etc.) on the device.
when interrupting work, during transport and
storage.
Economy mode – Normal mode
Mind the running direction of the chain links
Mind the running direction of the chain
links
Reduce the chain tension (-)
Increase the chain tension (+)
Max. cutting length 203 mm
This product complies with European regulations
specifically applicable to it.
Measured sound power level
L
WA
92 dB (A),
measured according to regulation 2000/14/EC)
Electrical devices do not go into the domestic
rubbish. Give devices, accessories and packaging
to an ecofriendly recycling.
According to the European Directive 2012/19/EU on electrical
and electronic scrap, electrical devices that are no longer
serviceable must be separately collected and brought to a
facility for an environmentally compatible recycling.
Содержание Atika KSHC 40-20
Страница 2: ......
