Altrad Atika KSHC 40-20, Оригинальное руководство пользователя

Страница: 15 / 128

15
 Keep the operating instructions in a safe
place for future use.

Pass the operating instruction to all persons
who work with the machine.
You may not start to operate the
machine until you have read these
operating instructions, observed all
the instructions given and installed
the machine as described!
This machine must not be operated /
used by children, persons with restricted
physical, sensory or mental abilities or a
lack of experience and/or know-how or
by persons who are not familiar with the
instructions.
Local regulations may stipulate an age
restriction for the user.
The machine and the charger must not be
operated by children or young people
under 16 years of age.
Keep children away from the charger
since they cannot estimate the hazards of
the charger.
Extent of delivery

After unpacking, check the contents of the box

That it is complete

Check for possible transport damage
Report any damage or missing items to your dealer or the
manufacturer immediately. Complaints made at a later date will
not be acknowledged.

1 power pruner - front

shaft - middle section

shaft - end section

1 guide bar

1 saw chain

1 guide bar cover

1 shoulter belt

1 operating manual

1 assembly and operating instruction

1 warranty declaration
The following parts are not included in the scope of delivery.
These accessories are available from your dealer or
manufacturer.

Charger ALG 40-1800 (article-no. 365500)

Accu AP 40-2000 (article-no. 365501)
or AP 40-4000 (article-no. 365503)
Contents
Extent of delivery 15
Operating times 15
EC Declaration of Conformity 16
Symbols operating manual 16
Symbols on the power pruner 16
Normal intended use 17
Residual risks 17
Safety instructions 17
 Safety instructions for power pruner 17

General safety instructions
17
Vibrations
18
Description of device / spare parts
19
Assembly 19
Before the first start-up 19

Chain lubrication (Oil-automatic)
19
Start-up 20
 Inserting the battery 20

Switching on / off 20

Eco-Mode 20

Clamping of saw chain 20

Checking the chain lubrication (oil-automatic) 21

Wearing the shoulder belt 21
Working instructions 21
 Before working 21
 Notes on tree care 21
 While working 22
 Saw backstroke 22
 General conduct when pruning 22
 Saw techniques 22
Maintenance and cleaning 23
 Maintenance 23
 Saw chain and guide bar 23
 Sharpening of saw chain 23
 Chain wheel 23
 Cleaning 23
 Cleaning of guide bar 23
Transport 23
Storage 24
Possible faults 24
Technical data 25
Guarantee 25
Operating times
Before initiating the device please observe the provisions
pertaining to corresponding laws (regional provisions) for
the noise control.
!
!