Alton EVOLUTION EVSTA1204M, Инструкция по эксплуатации

Страница: 9 / 18

9
Shelving Extension
Join at A-frame
50m
m
52m
m
Dia. 12
Diagram 12
You should use a hacksaw to cut the slat.
Make sure you do this on a flat sturdy
platform. Use a file to de-burr any sharp
edges.
Now fit the slats to the shelving arms as
on page 5.
Fit the shelving arms as before, at the set
distance down from the eaves bar (300mm).
You will need to fit an arm both sides of the
A-frame if this is where your join occurs.
When you have fitted the arms line up the
rear slat and mark it for notching. This
should be something close to diagram 12.