Alton EVOLUTION EVSTA1204M, Инструкция по эксплуатации

Страница: 8 / 18

8
Staging Installation
X 1
90º
Diagram 11
Diagram 10
Dia. 11
Once you are happy with the positioning of the staging arms
you can start to fit the staging slats. Place these upside down
on the staging arms, Insert 1 bolt into the channel (diagram
10) for every arm. Now turn the first slat over and locate the
bolts with the arms, start at one end loosely fitting the nuts to
the bolts. Repeat this for the second slat. You now need to
make sure everything is square and in line (diagram 6) then
tighten all the nuts on the staging. You can now repeat this
for the remaining slats.
Front Rear