LTO
LTO
TM
Installation Instructions
Mounting TOTAL RECALL
TOTAL RECALL has two fixing 'ears' at each side, allowing it to be firmly screwed to a suitable surface. Take care not to
mount the unit where it may become wet or subject to damage from items placed in the trunk area. The unit may be
mounted vertically or horizontally, but avoid mounting it upside-down (i.e. suspended under a shelf) as this may affect
heat dissipation.
TOTAL RECALL uses an internal fan, similar to the type used in a PC, to keep its powerful DSP device
cool. The unit's side and upper vents must not be obstructed.
IMPORTANT
IMPORTANT
Signal Inputs/Outputs
The Input terminals are standard (unbalanced) phono type sockets. Connect the low-level pre-amplifier output cables from
your car radio/cassette player, CD/receiver or other source unit to the 4 Input terminals of TOTAL RECALL.
There are 6 Output channels for Front, Rear and Subwoofer. Stereo pairs of terminals are colored red (right channel) and
white (left channel). Sub (mono) channels are color-coded black. Outputs should be connected to power amplifier input
channels.
Where you have a requirement to feed a high level, speaker level or balanced type signal from your head
unit to the Inputs of TOTAL RECALL, use the optional
Alto Mobile UI-4
universal input interface.
USEFUL
USEFUL
TIP
TIP
Power, Ground and Remote Switch-On (REM) Terminals
Caution:
Before making any connections, you must stop power delivery from the battery to avoid accidental short-circuits.
The conventional way is to disconnect the Negative terminal of the battery but beware -
this action will disconnect power
from all electrical items in the vehicle, including
:
a). the CD player or other audio source unit, which may require a code number to reactivate it. Do you know the code?
b). the security system, which may trigger and sound an alarm from its back-up battery. Do you know how to override the
alarm system?
