6
3. Front and Back Panels Description
3.1 Control Panel (Front Panel)
1
2
3
4
5
6
7
HALL1
HALL2
HALL3
SPRING1
SPRING2
TAPE
PLATE1
8
PLATE2
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
TM
40 bit Digital Effects Module
LTO
OUTPUT
10
0
MIX
DRY
WET
INPUT
0
10
VARIATIONS
PWR
PEAK
9
10
11
12
13
14
TREMOLO
CHORUS
FLANGER
DELAY
DELAY / REV.
15
CHORUS / REV.
16
ROTARY
FLANGER / REV.
R
PROGRAM
2
3
4
5
6
7
8
9
10
11
12
14
15
16
1
13
TOPVerb
2
3
4
5
6
7
8
9
10
11
12
14
15
16
1
13
b. Analog levels
a. Program and Variations Selections
- Program Select Knob:
The Program Select Knob is used to choose the program
you wish to perform.
- Variations Select Knob:
Each program on this apparatus has one parameter
which can be adjusted. Depending on the type of program selected, this knob
might alter reverb decay, chorus depth, etc.
- Analog Input Level Potentiometer:
The input level control sets the main input
Gain, before the signal reaches the input bus. It controls both the Left (Mono)
and Right input levels simultaneously.
- Analog Output Level Potentiometer:
The output level control sets the level
of the output signal going to the amplifier or mixer from TOPVerb.
- Dry/Wet Mix Potentiometer:
Adjusts the balance between the dry signal coming
c. PEAK LED and Power LED
into the input and the effects generated by TOPVerb.
- Power LED:
when this unit is connected to mains, this LED will turn red, which
means the unit is in the state of standby.
- PEAK LED:
This LED lights up when the input signal is too strong. In case of
the unit being muted, this LED also lights up.