10
in-line between the output of the mixing console and the input of a tape deck
or power amplifier. This last setup would effect the entire mix output.
5. Preset Functions Descriptions
1). Hall 1
This is a large bright hall program with 54ms predelay, and can be used for al-
most anything.
4). Spring1
This program is suitable for organs and will still find them in many guitar amplifiers.
5). Spring2
This program is similar to the previous one, and also be used in organs and
guitar amplifiers.
6). Tape
This program allows you to create more complex patterns that can add a rhyth-
mic quality to the instrument.
5.1 Presets
2). Hall 2
This is a warmer hall program with 54ms predelay, and adds depth and character
to acoustic instruments.
3). Hall 3
The third program is a medium bright hall with no predelay, and can be used on
rock snares and percussions.
7). Plate1
The plate algorithm simulates the "sound" of a classic plate reverb. The plate1
is a classic bright vocal plate.
8). Plate2
A warmer variation of the previous program, sounding very well on acoustic guitar
and strings.
9). Tremolo
This program provides an amplitude modulation of the input signal and is normally
used as "WET" effect without adding direct sound or adding a few percentage
of it, so to avoid the direct sound to cover the amplitude modulation.
10). Chorus
This program tries to recreate the illusion of more than one instrument from a
single instrument sound. Typical modulated effect suitable for vocals, guitar and
keyboards.