21.10.2004
ALTO Danmark A/S
1. Preface
ALTO Danmark A/S congratulates you with your low-pressure foam cleaning system
which full fills the latest technical hygiene requirements.
Prior to installation and start of operation please make sure that your operational staff
reads the directions for use. On operation as laid down in the directions for use you will
achieve optimum cleaning and hygiene in your factory and minimum requirement for
maintenance and repair work.
The combination of a centrifugal pump and an injector offers the possibilities of automatic
and manual:
a)
-foam spreading of detergents
b)
-rinsing off with water
2.
Connections to the Low-pressure Plant
2.1
Mounting of the Plant
The plant should only be mounted in frost-free rooms.
2.2 Water
Connection
a)
Prior to connection to the plant the supply pipe should be rinsed through
carefully in order to remove coarse impurities and metal shavings.
b)
The water connections for pump station PZC (hot or cold water) are at the top of
the plant (A on the layout drawing on page 4).
