If you press this key for a few seconds, your Transmitter will be switched
ON or OFF. Once you have switched the unit ON, just press this key again
slightly and you can edit various parameters such as CHANNEL, GROUP,
RF POWER LEVEL and LOCK/UNLOCK. Once you are in the LOCK position
no further operation is allowed. And in a few seconds, the display will show
the current selected frequency (in MHZ). Battery level will also be shown.
Once you are in operation mode, you can access this key to edit certain
parameters. Press this key for a few seconds and the unit will enter in the
MUTE mode. (In this way, you can tell your Bass Player what you think about
the Sound Engineer without everybody knowing that!). Press it again for a few
seconds and you will unmute the unit.
This nice blue LCD will indicate the current operation status.
This connector is used to connect the unit with the clip microphones. for
example, HM-38 condenser microphone or LM-10 clip microphone.
With the rechargeable batteries put inside, use the charger supplied to
recharge the batteries.
This unit may be powered from one pair dry or rechargeable batteries,
Um3 size AA 1.5V.
It is a flexible antenna. To get effective transmission, never cover the
antenna with hand, clothes, etc. during operation, and always position
the transmitter nearby the receiver.
It is the detachable belt clip for easy carry during the live applications.
3. CONTROL ELEMENTS
SP
OT
LIG
HT
5. MODELLING TECHNOLOGY
Here is a List and description of the MODELS avai lable on the
LTO Receivers:
FLAT- In this position, the Modeller is in bypass mode. The
LTO
Modeller is not adding any character to the Audio Output
CONFERENCE- To be used during Meetings. Especially made for
speech and to avoid the typical boominess of many wireless microphones
used for such purpose.
BROADCAST- This Model will add a certain character to the signal.
It is typical of the Male Announcers through a solid state Transmitter.
WARMTH- Good for Lead Vocalist Male and Female. It will make the
Male voice warmer and the Female voice more body.
DE-ESSER- The name tells everything. Use it to de-emphasize the sibilants,
like the letter sound 's', for example, from your vocals.
VINTAGE RADIO- Old tube based Receivers made the Announcer voice
sound like... yeah, we call it Vintage. Try it for a smooth satin voice. Ideally used
for speech, but we found some other neat applications in the studio as well!
MID-WARMTH, a moderate voice enhancement making use of Bass
enhancer.
GROOVY- to add a touch of groov e to Male and Female Lead Vocalist.
Perfect for Blues.
SHARP- makes human voice quite crispy. Perfect for voice poor in
high frequencies or if you get a cold...
KARAOKE- yes, microphones are used in a very peculiar way in Karaoke
Bars and Venues. Usually the sound systems there are poor. Use this Model to
add high frequencies and have your voice sound like a Pro's!
HEAVY METAL- This model will make your voice sound very aggressive.
Good for Rock & Roll and if you have an argument with your Mother in law...
PIANO BAR- it similar to the Karaoke Model but we have also added
key low frequencies to give the voice more body.
DISCO- It is similar to the Heavy Metal mod el but more tailored for
Disco Music.
CHOIR- Selected frequencies have been manipulated to make this
Model suitable for more than one vocalist when singing in a choir
FEMALE VOICE- Female Singers voices present a frequency response
that is quite different from the Male voice. This Model gently adds certain low
frequencies to make the female voice more consistent and at the same time will
make the highest frequencies of the female voice more sparkling and defined.
PIANO BAR CHOIR- It is a combination of the Karaoke Model and
the Piano Bar Model. Good when more than one voice is singing along together.
,
, for Dynamic or Condenser microphone
, for Guitar, bass and keyboards
, GND
Phantom power supply for Condenser microphone
(1)
(4)
(3)
(2)