Fig 4
Press the CH/ON key for a few seconds and the transmitter will be powered ON.
At this point the blue back lighted display will show:
Fig 5
Preset frequency
Remaining battery life
With the Transmitter switching ON, you can slightly press the CH/ON key again
and you will access to the following parameters:
Preset Group
Preset Channel
The frequency at which the unit is operating
The Battery Status
And now that you know how to operate your MOD-800R Receiver, let's
learn how to use the MOD-800 Transmitters. The following instructions
apply both to the handheld version and to the bodypack version.
There are 2 keys on the Transmitter labelled CH/ON and SELECT.
Fig 6
Fig 7
1
2
3
4
5
6
7
8
9
10
-100 dB
-96 dB
-93 dB
-90 dB
-87 dB
-85 dB
-83 dB
-81 dB
-79 dB
-77 dB
MHz
AF
RF
MHz
3. CONTROL ELEMENTS
4. OPERATION
Note: Why
LTO wireless systems come with 144 different frequencies?
Not because you will need to use 144 different microphones at the same
time. It is unlikely that you will use more than 8 systems at the same
time so why 144 frequencies? This mainly depends on Countries regulations.
We offer frequencies from 470 to 900 MHZ. Some of these frequencies
are illegal in certain Countries and vice versa. Offering such a wide range of
frequencies we make sure that each single Country on the planet will
have more than enough choice of frequencies available. Not only: A
certain frequency is close to the frequency generated by lighting equipment,
a computer, a fax machine and so on. Therefore, thanks to the large
number of frequencies available you can easily switch to another frequency
that is interference-free.
In your Transmitter, there are 12 frequency bands or GROUPS. Each Group
contains 12 channels according to EMC regulations.
To select a Group you must first switch your Transmitter ON by pressing the
CH/ON key for a few seconds until you hear the beep and the blue display is
lighted. Then press the CH/ON key again slightly and you will access the GROUP
menu. At this point use the SELECT key to change the GROUP value from 1 to
12. Now, to access the CHANNEL menu, press again slightly the CH/ON key
two times and use the SELECT key to change frequency from 1 to 12. Your
setting will be automatically saved in a few seconds and the display will go back
to the main menu showing the operating frequency.
Once you have changed the operating frequency on your Transmitter,
you need to activate the SCAN function in your MOD-800R Receiver. In this
way the Receiver with synchronize automatically on the Transmitter frequency.
Your Transmitter can operate on three different levels of output power . These
are different from the Handheld Model and the Bodypack model.
For the Handheld model the levels are
- PL 0, the output power is 0 dBm
- PL 1, the output power is 5 dBm
- PL 2, the output power is 10 dBm
And for the Bodypack version the levels are
- PL 0, the output power is 0 dBm
- PL 1, the output power is 5 dBm
- PL 2, the output power is 10 dBm
position the transmitter nearby the receiver.
3. CONTROL ELEMENTS
4. OPERATION