11
There are 2 distinct categories of PRESETS:
User PRESETS
5.1.1 Load PRESET
This menu page allows the required PRESET to be loaded and made operatively.
To load a PRESET:
Use the
to reach the required PRESET.
DIAL
10 Factory PRESETS and 64 User PRESETS.
Press
ENTER.
Factory PRESETS
L o a d
2
U
2 x 2 W
P r e s e t
+ 2 M A X
L o a d
U
P r e s e t
6 4
* D e f a u l t *
A 1 3 5
U
6 4
* D e f a u l t *
B 2 4 6
A 1 3 5
F
3
B 2 4 6
2 x 3 W
Factory-programmed storage.
Factory PRESETS can be used normally, temporarily modified, but can't be cancelled,
overwritten or permanently modified. Factory PRESETS contain some specific settings
for certain types of enclosures and all the system's usable configurations. For this
reason they're the ideal starting point for creating custom PRESETS.
Stored data that can be programmed by users.
User PRESETS are internal memory areas in which your own personal settings can
be saved.
Note:
since the system must always be configured, there are no empty memory areas. All the User and Card
areas unused by custom
are automatically occupied by the
, which contains
PRESETS
*Default* PRESET
a standard start configuration with all the values of the various parameters at zero.
The system returns to default status and the display shows the information on the PRESET that has just been
loaded.
Note:
Factory PRESET #3
In the example,
, named "2x3W" has been loaded: Its system configuration is Input A
signal assigned to outputs 1, 3 and 5; Input B signal assigned to outputs 2, 4 and 6.
Loading a PRESET, a PRESET Change command is also automatically sent to the serial ports and can be used
to automatically load a PRESET with the same number to any other MAXIDRIVE3.4 COMPACT units connected
and enabled (Refer to
menu
submenu
option).
UTILITY
- Comm. Setup
- PRESET Change RX
