Alto L-6, Руководство пользователя, Страница: 7 / 19

BAL OR
UNBAL
+15dB -45dB LINE
0dB 60dB MIC
LINE IN 1
TRIM
MIC 1
BAL OR
UNBAL
+15dB -45dB LINE
0dB 60dB MIC
LINE IN 2
TRIM
MIC 2
LEFT LEFT
RIGHT
LINE IN 3/4
LEFT (MONO)
RIGHT
LINE IN 5/6
LEFT (MONO)
RIGHT
MAIN MIX OUTPUT
LEFT
2-TRACK IN/OUT
TAPE IN TAPE OUT
L
R
RIGHT RIGHT
CONTROL ROOM OUTPUT STEREO AUX RETURNS
PHONES
AUX SENDS
1 2
3
1 2
3
6-CHANNEL MIXING CONSOLE
L-6
LTO
R
WITH
DIGITAL EFFECTS
1
2
1 MIC INPUT (1 to 2)
Your L-6 is equipped with 2 low-noise microphone preamplifiers with optional
phantom power, 60 dB of Gain and 115 dB of S/N ratio. You can connect
almost any type of microphone. Dynamic microphones do not need phantom
power. Use phantom power only with condenser microphones but make sure
that the phantom power button is disengaged before connecting the microphone.
Phantom power will not damage your dynamic microphones but it may damage
tube or ribbon microphones so make sure to read the microphone instructions
manual before engaging phantom power. Use switch (24) to activate/deactivate
phantom power. These two channels are also equipped with 1/4" TRS balanced/
unbalanced LINE-IN plugs to connect line-level instruments such as keyboards,
drum machines and effect devices.
NOTE : Never try to connect a line-level signal to the XLR MIC input when the
phantom power is engaged or you may seriously damage your equipment.
2 STEREO LINE INPUTS (3 to 6)
These are channels 3/4, and 5/6. They are organised in stereo pair and provided
with 1/4" TRS phone sockets. If you connect only the left jack, the input will
operate in mono mode, that is the mono signal will appear on both input
channels. You can use these inputs with a stereo keyboard, drum machine, etc.
3 TRIM
This control is provided with 2 different indication rings: one is for the MIC and
the other for the LINE input. When you use a Microphone, you shall read the
MIC ring (0~60 dB); when you use a line level instrument, you shall read the
LINE ring (+15~-45 dB). For optimum operation, you shall set this control in a
way that the PEAK LED will light up only occasionally in order to avoid distortion
on the input channel.
3
4 5 6 10
7 8 9
5
SPO
TLIGHT
4. CONTROL ELEMENTS