Alto L-6, Руководство пользователя, Страница: 10 / 19

-30
0
- +15
8
MAIN MIX LEVEL
-4
-10
0
0
- +15
8
POWER PHANTOM PHANTOM
MAX -
8
PHANTOM PWR
10
CLIP
2TK TO
CTRL ROOM
2TK TO MIX
L
R
AUX RETURNS
(DFX)
OUTPUT LEVEL
CONTROL
ROOM
PHONES /
18 19
20
22
23
21
24
25 26
SPO
TLIGHT
4. CONTROL ELEMENTS
8
17 LOW
If you turn this control up, you will boost all frequencies below 80 Hz. You will
give more punch to bass drums and bass guitar; and you will make the male
vocalist more "macho". Turn it down and you will cut all the frequencies below
80 Hz. In this way you can avoid low-frequency vibrations and resonance thus
preserving the life of your woofers.
MASTER SECTION
18 MAIN MIX LEVEL
This knob controls the level of the signal sent to MAIN OUTPUTS and TAPE OUT.
Also AUX RETURNS signals will be sent to this control.
19 PHONES/CONTROL ROOM LEVEL
This knob controls the signal sent to CONTROL ROOM OUTPUT & PHONES
OUTPUT.
20 OUTPUT LEVEL METERS
These consist of two column of 6 LEDs each ranging from -30 dB to +18 dB
(CLIP). The 0 LED corresponds to a level output of 0 dBu. The CLIP LEDs come
to life when the output r18 dBu. Set the MAIN MIX level control so
that the CLIP LEDs only flashes occasionally. In general, you get a good mix
level when the Meter LEDs operate in the range 0 to +10. If you 10,
you will get distortion. If even -30 LEDs are sleeping your signal-to-noise ratio
will suffer.