manualshive.com logo in svg

Alto APM 120, Руководство пользователя

Поделиться
Скачать
Alto APM 120 Скачать руководство пользователя страница 3

IN THIS MANUAL:

1. INTRODUCTION................................................................................1
2. FEATURES.......................................................................................1

4. CONTROL ELEMENTS......................................................................5
5. INSTALLATION & CONNECTION......................................................15

1. INTRODUCTION

Thank you for your purchasing of the L TO APM120 12-channel (16-channel for APM
160) power mixer with 24-bit digital multi-effect built-in. It is just one of the many

LTO products that a talented, multinational Team of Audio Engineers and Musicians

have developed with their great passion for music. Your APM is a remarkable compact
powered mixer that doesn't find many equals in the market today. With 8 microphone
(12 microphone for APM160) and 2 stereo Line-level inputs for serious live performances,
your APM Series also includes a 24-bit digital multi-effect with 16 Factory Presets and
16 variations for every preset, for a total of 256 different digital effects. There is a
three bands EQ on mono input channels, four bands EQ on stereo input channels. Use
it for small Gigs, for Church applications and for Conference.
Enjoy your APM Series and make sure to read this Manual carefully before operation!

2. FEATURES

8 MONO (APM120)/12 MONO (APM160) inputs with gold plated XLR and

balanced TRS jack.

2 Stereo input channels with balanced TRS jacks.

GAIN and +48 V Phantom power for mono/MIC inputs.

Peak LED in each channel.

3-band EQ with sweepable MID on mono inputs.

4-band EQ on stereo inputs.

24-bit internal DSP with 256 effects, 16 presets by 16 variations with

DSP mute switch and peak LED.

9-band graphic EQ.

BNC socket for connecting gooseneck lamps.

Low cut filters 75 Hz, 18 dB/Oct. on mono inputs.

Low pass filter on mono outputs (80~120 Hz).

High accurate 12-segment Bar graph Meters.

Maximum Output Power(EIAJ):

APM120: 500 W+500 W/4 Ohms (1000 W bridge/8 Ohms)

APM160: 750 W+750 W/4 Ohms (1500 W bridge/8 Ohms)

1

7. BLOCK DIAGRAM..........................................................................20
8. TECHNICAL SPECIFICATIONS...........................................................22
9. WARRANTY..................................................................................24

3. QUICK START..................................................................................3

6. PRESET LIST.................................................................................19

Содержание APM 120




























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды