Alto-Shaam Halo Heat 500-GD Скачать руководство пользователя страница 4

This appliance, complete with unattached items and
accessories, may be delivered in one or more pack-
ages.  Check to insure that all acessories that were
ordered have been received with the unit.

Alto-Shaam holding cabinets are designed for the 
purpose of maintaining hot food at a temperature 
for safe consumption.  The unit must be installed on
a level surface in a location that will permit the
equipment to function for its intended purpose and
allow adequate access for proper cleaning and 
maintenance.  

The appliance must not be installed in any area
where it will be affected by steam, grease, 
dripping water, high temperatures, or any other
severely adverse conditions.

Level the appliance from side-to-side and 

front-to-back with the use of a spirit level. 

In order to maintain standards established by 
the National Sanitation Foundation, all stationary
counter-mounted equipment must be secured flush 
to the counter and the entire base sealed to the
counter with NSF approved sealant or equipped 
with 4" (102mm) legs to provide minimum 
unobstructed space beneath the unit.  Warranty 
will become null and void if these directions are 
not followed.

# 8 2 0   O p e r a t i o n   a n d   C a r e   M a n u a l   •  3.

I N S TA L L AT I O N

S i t e   I n s t a l l a t i o n

TO PREVENT PERSONAL INJURY, 
USE CAUTION WHEN MOVING OR 
LEVELING THIS  APPLIANCE.

N E T   W E I G H T

60 lb. (27 kg)

IMPROPER INSTALLATION, ALTERATION, 
ADJUSTMENT, SERVICE OR MAINTENANCE
COULD RESULT IN SEVERE INJURY, DEATH
OR CAUSE PROPERTY DAMAGE.

C L E A R A N C E   R E Q U I R E M E N T S

3-inches (76mm) at the back

2-inches (51mm) at the top 

1-inch (25mm) at both sides

Содержание Halo Heat 500-GD


















Отзывы: