background image

The cleanliness and appear-

ance of this unit  will con-
tribute considerably to 
operating efficiency and
savory, appetizing food.  Good
equipment that is kept clean
works better and lasts longer.

CLEAN THE UNIT 
THOROUGHLY 

AFTER EACH USE

1.

Turn lights and adjustable thermostat(s) to the
"OFF" position.  Disconnect unit from power
source, and let cool. 

2.

Remove, cover or wap, and store unused prod-
ucts under refrigeration.

3.

Remove all detachable items such as wire
shelves, side racks, and any drip pan.  Clean
these items separately.

4.

Clean interior with a
damp cloth or sponge 
and any good commercial
detergent at the 
recommended strength.

5.

Spray heavily soiled
areas with a water 
soluble degreaser and let
stand for 10 minutes, then remove soil with a
plastic scouring pad.

NOTE:

Avoid the use of abrasive cleaning com-
pounds, chloride based cleaners, 
or cleaners containing quaternary salts.

Never

use hydrochloric acid 

(muriatic acid) on stainless steel.

6.

Clean control panel, door vents, door handles,
and door gaskets thoroughly since these areas
harbor food debris.

7.

Rinse surfaces by wiping with sponge and clean
warm water.

8.

Remove excess water with sponge and wipe dry
with a clean cloth or air dry.  Leave door open
until interior is completely dry.  Replace shelves.

9.

Interior can be wiped with a sanitizing solution
after cleaning and rinsing.  This solution must 
be approved for use on stainless steel food 
contact surfaces.

10.

To help maintain the protective film coating on
polished stainless steel, clean the exterior of the
cabinet with a cleaner recommended for stainless
steel surfaces.  Spray the cleaning agent on a
clean cloth and wipe with the grain of the 
stainless steel.

11.

Clean glass with a window cleaner.

# 8 2 0   O p e r a t i o n   a n d   C a r e   M a n u a l   •  9.

C A R E   A N D   C L E A N I N G

AT NO TIME SHOULD THE INTERIOR OR 
EXTERIOR BE STEAM CLEANED, HOSED 
DOWN, OR FLOODED WITH WATER OR 
LIQUID SOLUTION OF ANY KIND.  DO NOT 
USE WATER JET TO CLEAN.

S E V E R E   D A M A G E   O R   E L E C T R I C A L   H A Z A R D  

C O U L D   R E S U LT.

   

WARRANTY BECOMES VOID IF APPLIANCE IS FLOODED.

Содержание Halo Heat 500-GD


















Отзывы: