Alto-Shaam 1000-UPS/EPL Скачать руководство пользователя страница 8

Страница: 8 / 19

IN STA L L ATION / OPERATION / SERVIC E MA N UA L • 8.

OPERATION

E l e c t ro n i c C o n t ro l

ON/OFF KEY

Press the

OFF KEY

once. Press and hold the

OFF KEY

until the LED

DISPLAY

turns off (at least

three seconds).

UP/DOWN ARROW KEY

The

UP AND DOWN ARROW KEYS

are used for a variety

of settings when selecting the holding temperature.
If an

ARROW KEY

is pressed and released the display

will show the current set temperature for two seconds.
If an

ARROW KEY

is held (at least eight seconds), the

value will change at a rapid rate. If the

ARROW KEY

pressed and released in rapid succession, the set
temperature will change by increments of one degree.

ENABLE/DISABLE BEEPER

A beeper sounds when an error code is displayed.
To choose between beeper on and beeper off mode,
the control must be OFF, then press and hold the

DOWN

ARROW KEY

until either "ON" or "OFF" is shown in the

LED

DISPLAY

FAHRENHEIT / CELSIUS

With the control OFF, to choose between Fahrenheit
and Celsius, press and hold the

UP ARROW KEY

until

either °F or °C is shown in the LED

DISPLAY

The control has a four-digit LED display. When the
display is ON, it will show current holding
temperature, as well as diagnostic information.

CONTROL LOCK

The warmer controls can be locked so that no changes can
be made to the set temperature.
To

lock the display

, press and hold the

OFF KEY

and the

UP ARROW KEY

at the same time. The

LOCK

INDICATOR

will illuminate. When the

LOCK INDICATOR

illuminated, additional programming will not be
functional other than the key sequence required to unlock
the panel.
To

unlock the display

, press and hold the

OFF KEY

and

the

DOWN ARROW KEY

at the same time. The

LOCK

INDICATOR

will extinguish. The panel keys will resume

normal function.

°F /°C

UP AND DOWN
ARROW KEYS

LOCK

INDICATOR

LED DISPLAY

SHELF TIMER KEYS

UPPER

COMPARTMENT

OFF

Содержание 1000-UPS/EPL




















Результаты поиска

Содержание 1000-UPS/EPL

Отзывы:

Бренды по названию

Популярные бренды

Alto-Shaam 1000-UPS/EPL, Установка, эксплуатация и обслуживание

Результаты поиска

Содержание 1000-UPS/EPL

Отзывы:

Бренды по названию

Популярные бренды